User Manual

AS8100 Sitespan User Guide Version 3.7
605-0000-426
DLP 115
Draft Issue 6.0. Date 4/4/00
Page 266 of 305
2. Create a name in the name field (it is suggested the name reflects the service being offered i.e.
ST_R2 line @ 64kbit/s) Select the type of ST employed and the number of lines supported by
the class.
3. Set the acquisition and clear call on fail times. The acquisition time sets the elapsed time before
the ST deems it has been unsuccessful and disconnects. The ST attempts to re-acquire choosing
a channel from the latest free list. The clear call on fail time sets the time allowed for the
system to clear before re-acquiring.
4. Set the bandwidth to agree with the service selected. Failure to do so may result in channels not
being supported due to lack of bandwidth. The table below shows the bandwidth required for
each service offering.
Band Width kHzRate Allocation
40 80 160
1*64 kbits/s
♦
2 *64 kbits/s
♦
1*32 kbits/s
♦
2*32 kbits/s
♦
4*32 kbits/s
♦
1*64 kbits/s +2*32 kbits/s
♦
5. The Acquisition Comfort Tone is generated from the ST to give the user an indication that the
ST is trying to acquire.