User Manual

AS8100 Sitespan User Guide Version 3.7
605-0000-426
DLP 112
Draft Issue 6.0. Date 4/4/00
Page 259 of 305
15. In the screen shot above the new variant number appears in the New Variant field but the
system is currently using variant 0. To switch to the new variant click left mouse button on
the Switch button and the new variant is adopted.
16. The Re-Establish button provides a 150 second break in the E1 link that is used if the E1
link needs to be reset. Use the re-establish in preference to hot plugging the TU card as
only the E1 being re-established is effected, all the other E1links on the card are left
uninterrupted.
17. The State and Cause fields display system state messages and cause as interpreted by
Sitespan
18. The PSTN field shows Addresses, Timeslots, and Blocking status for each L3 address
provisioned. Any services not provisioned are not displayed. Timeslots may be forced into
a blocked/unblocked state by selecting the Address and click left mouse button on the
Block/Unblock buttons. The Block Request button does not force the state but informs the
switch to block the channel when it becomes free.
19. The ISDN Field shows Addresses, Timeslots, and Blocking status for each L3 address
provisioned as well as provision for activating and de-activating the ISDN Channel Any
services not provisioned are not displayed. Timeslots may be forced into a
blocked/unblocked state by selecting the Address and click left mouse button on the
Block/Unblock buttons. The Block Request button does not force the state but informs the
switch to block the channel when it becomes free.
STOP. THIS PROCEDURE HAS BEEN COMPLETED.