User Manual

AS8100 Sitespan User Guide Version 3.7
605-0000-426
DLP 102
Draft Issue 6.0. Date 4/4/00
Page 227 of 305
2. Click the right mouse button on the Analogue Unit (AU) card to drop menu. Select
Airspan DA AU properties.
3. Select the number of users that can use the system at any one time. When in service it is
necessary to check the soft errors reported. If soft errors occur the number of users
should be increased or the TX power reduced to produce less power output until the soft
errors are eliminated.
STOP. THIS PROCEDURE HAS BEEN COMPLETED.