User Manual

AS8100 Sitespan User Guide Version 3.7
605-0000-426
DLP 064
Draft Issue 6.0 Date 4/4/00
Page 204 of 305
3. Edit the customer information in the Name, Address, and Telephone Number fields. Note:
to move to a new line in the address field use Ctrl and ↵.
4. Select the Tariff from the drop down menu. The inclusion of the tariff is for information
only and does not set a tariff.
5. The customer may be moved to a new equipment by selecting the Shelf, (the field may be
dropped by clicking the mouse on the ê) Modem and Line number. If the modem / line is
already in use then the Sitespan displays a message, select a new modem / line.
6. Set the Intrusion Tone if the subscriber is to receive indication of a test clerk on the line.
This is for ST-V2 using DASS only.
7. Set the MCI (Malicious Call Indication) to enable the facility. This is for ST-V2 using
DASS only.
8. Set the customers active by clicking in the circuit activation box (o). A x shows that the
subscriber is in service.
9. Click OK to initiate the creation of the subscriber. The Network [Subscribers] window
shows the configuration details.
STOP. THIS PROCEDURE HAS BEEN COMPLETED.