User Manual

AS8100 Sitespan User Guide Version 3.7
605-0000-426
DLP 060
Draft Issue 6.0 Date 4/4/00
Page 194 of 305
3. Enter the customer information in the Name, Address, and Telephone Number fields.
Note: to move to a new line in the address field use Ctrl and ↵.
4. Select the Tariff from the drop down menu. The inclusion of the tariff is for
information only and does not set a tariff.
5. Select the hardware configuration by selecting the Shelf, (the field may be dropped by
clicking the mouse on the ê) Modem and Line number. If the modem / line is already
in use then the Sitespan displays a message, select a new modem / line.
6. Set the Intrusion Tone if the subscriber is to receive indication of a test clerk on the
line. This is for ST-V2 using DASS only.
7. Set the MCI (Malicious Call Indication) to enable the facility. This is for ST-V2 using
DASS only.
8. Set the customers active by clicking in the circuit activation box (o). A x shows that
the subscriber is in service.
9. Click OK to initiate the creation of the subscriber. The Network [Subscribers]
window shows the configuration details.
STOP. THIS PROCEDURE HAS BEEN COMPLETED.