User Manual

AS8100 Sitespan User Guide Version 3.7

605-0000-426

DLP 019

Draft Issue 6.0 Date 4/4/00

SELECTING CARD VIEWS

Individual cards may be viewed. Each Card View gives inventory information

and allow the operator to view and set parameters relevant to the particular card

being viewed. This procedure provides guidance on viewing a card from the GUI

shelf view. Alternatively the card could be displayed by double clicking the card

on an object list.

STEP PROCEDURE

1. Display the shelf containing the card to be viewed. (See GSI-017 Selecting Views).

Alternatively the card view can be displayed by clicking the object in Tree View.

2. Double click the mouse while pointing to the required card.

3. The Card View should now be displayed.

4. Each Card View displays inventory information as follows:

• Serial Number: Electronically retrieved from the card.

• Firmware Code:

• State: IS = In Service.

FLTY = Faulty.

ENP = Equipment not provided.

SP = Spare.

UT = Under test.

LK = Locked.

SEC = Secure (ST only)

5. Alarms Icons are displayed as:

Intermittent Alarm (Amber).

Permanent Alarm (Red).

Receiving Attention (Tick).

6. Other information may appear in a specific Card View. For details see DLP-020 and

DLP-021.

STOP. THIS PROCEDURE HAS BEEN COMPLETED.