User Manual

AS8100 Sitespan User Guide Version 3.7

605-0000-426

DLP 018

Draft Issue 6.0 Date 4/4/00

MONITORING ALARMS USING SITESPAN GUI VIEWS.

Use this procedure to locate the source of an alarm on the network.

STEP PROCEDURE

1. From the NETWORK [Object, Site, List] select site to monitor.

2. From the View menu, select the Site View. In Site View all cards that are installed and

operating normally are displayed in green. Any alarm condition causes the shelf that

is in receipt of that alarm condition be to displayed as red.

3. Double click the mouse on the shelf showing the alarmed state to get Shelf View or

from the View menu, select Airspan 60 [shelf type] Modem Shelf View to display the

shelf view.

4. In this view, the individual modules display the appropriate status colour. In the

illustration below (M2) on Modem Card 1 shows a different colour for an active

alarm.

5. An intermittent alarm is shown as an amber clock icon and a permanent alarm as a

red clock icon.