User Manual

AS4000 Operations and Maintenance
Section
605-0000-431
0
. Issue 1.6. Date3/2/99
Page 5 of 10 © Copyright Airspan Communications Corporation 1999
SAFETY INSTRUCTIONS - WARNINGS AND
CAUTIONS
SAFETY
1. Read and follow all warning notices and instructions marked on the product or included in
this manual
WARNING - HAZARDOUS VOLTAGES
On DC sections, short circuiting the low voltage, low impedance circuits can cause severe
arcing that may result in burns or eye damage. Remove rings, watches etc. to avoid shorting
DC circuits.
Electro-Static Discharge ESD
Electro-Static Discharge. Many circuits contain devices which are susceptible to damage from
high impedance voltage sources. To avoid such risks always follow anti-static procedures
where marked.
NOTE
Airspan Products do not contain hazardous substances (as defined in UK ‘Control of
Substances Hazardous to Health Regulations 1989’, and the ‘Dangerous Substances
Regulations 1990’). At the end of any Airspan product’s life cycle, the customer should
consult with ACC to ensure that the product is disposed of in conformance with the relevant
regulatory requirements