User Manual

AS4000 Operations and Maintenance
Section
605-0000-431
6
. Issue 1.6. Date3/2/99
DLP-028
Page 22 of 22
4. Set Shelf Identity
a) Ensure that each shelf identity is set by the provision of links as shown in Table 2.
Shelf JP1 JP2
1
On On
2
Off On
3
On Off
4
Off Off
Table 2. Shelf Identity Settings
5. Re-insert the cards into the shelf.
6. Connect DC cable plug to the DC input socket PL6 and connect the crimped cable
screen earth to the lug positioned alongside PL6. See Figure 1-4. The shelf power cycles
and sets itself into service.
STOP. THIS PROCEDURE HAS BEEN COMPLETED.