User Manual

AS4000 Operations and Maintenance
Section
605-0000-431
7
. Issue 1.6. Date3/2/99
DLP-026
Page 13 of 22
Figure 2-1. Edit Subscriber
2. Enter the customer information in the Name, Address, and Telephone Number
fields. Note: to move to a new line in the address field use Ctrl and ↵.
3. Select the Tariff from the drop down menu. The inclusion of the tariff is for
information only and does not set a tariff.
Figure 2-2. Tariff Indicator
4. Select the hardware configuration by selecting The Shelf, (the field may be dropped
by clicking the mouse on the ê) Modem and Line number. If the modem / line is
already in use then the Sitespan will give a message, select a new modem / line.
Figure 2-4. Existing Subscriber Warning
5. Set the customers active by clicking in the circuit activation box (o). A x shows
that the subscriber is in service.
6. Click OK to initiate the creation of the subscriber. The ‘Network [Subscribers]’
window shows the configuration details.
Figure 2-6. Created Subscriber