User Manual

AS4000 Operations and Maintenance
Section
605-0000-431
7
. Issue 1.6. Date3/2/99
DLP-025
Page 8 of 22
ports listed are those available on the Server machine; this may not necessarily be the
machine running the Sitespan Equipment View.
Figure 2-16. Select COM Port
4. Select Rx & Tx frequencies by clicking ê to drop the options box and clicking the
appropriate frequency pair on the drop down list. The frequency pairs are usually
determined as part of the system planning process.
Figure 2-18. Select Frequency
5. Select the PN code (1-7) by clicking ê to drop the options box and clicking the
appropriate number from drop-down list. The PN codes are usually determined as part of
the system planning process.
Figure 2-20. Select PN Code
6. The Alarm Filter Configuration section of the window allows the user to increase or
decrease the sensitivity of the alarms. These are automatically set to default levels. To
change the thresholds see The AS8100 (Sitespan) Reference Manual 605-0000-427 for
details on setting alarm thresholds.
7. Click the OK button to get view of the fully configured shelf. The RF, Analogue, TU,
SC and installed Modems are activated and will be highlighted in the active or alarm
state.