Manualshelf

User Manual

ManualsBrandsAirspan Communications ManualsElectronicsCentral Terminal PCS Base Station
141142143144145146147148149150
AS4000 Operations and Maintenance
Section
605-0000-431
6
. Issue 1.6. Date3/2/99
DLP-020
Page 48 of 60 © Copyright Airspan Communications Corporation 1999
4. If the PC readings are not consistent with the receive fade margins then change the
CRU.
5. Remove the in-line breakout test cable and re-connect the drop cable. If the CRU
has to be moved to remove the in-line breakout test cable and re-connect the drop
cable, then mark the orientation of the CRU on to the mounting bracket as described
in paragraph 1.
6. Lock and secure the CRU in position by tightening the locking bolts on the CRU
mounting bracket.
STOP. THIS PROCEDURE HAS BEEN COMPLETED.
.