User Manual

AS4000 Operations and Maintenance
Section
605-0000-431
6
. Issue 1.6. Date3/2/99
DLP-020
Page 44 of 60 © Copyright Airspan Communications Corporation 1999
Ariel view showing CRU
hinged from left
Use a sharp pencil
to mark the orientation
of the CRU prior to the
removal of the drop
Cable
Figure 1-1. CRU Alignment Position Marking
2. Connect the in-line breakout cable to the CRU. Connect the other end to the drop
cable. Re-position the CRU if it has been moved. Lock and secure the CRU in
position by tightening the locking bolts on the CRU mounting bracket.