User Manual

AS8100 Sitespan
Release Description
DLP 001
605-0000-449
Issue 1.1 Date 28/10/98
Page 8 of 2
for which the loop back is to be applied. Alternatively, conduct
loop back in Sitespan Release 2.4 before creating translation
database. Note: Sitespan Release 1.12 does not support
functional loop backs.
7.3.2. Select Loop Back Type dialogue box retains history of the loop back
type selection (from any previously run test). So when a new test is
begun it activates this selection by default (e.g. by selecting TU
through as path B1, Loop back Position towards the network, Select
Loop Back Type may show B2 selection (or any other type which
may have been selected on the previous occasion). [Test Reference
8.11.6.5]
Workaround - The user must ensure that the correct loop back
type is selected before actual loop back is executed (i.e. before
the OK command).
7.3.3. Modem Shelf views do not indicate a loop back condition (absence of
colour on the modem card) for ST (s) under test.
Workaround - The ST View indicates loop back condition. The
ST View can be activated from the Modem Shelf view.
7.3.4. Common Subscriber View - The default column headings are Airspan
specific (e.g. ‘Modem shelf’, ‘modem card’ etc.), therefore there
should be common name based description approach or have extra
columns for LS120 equipment.
Workaround - None.
7.3.5. Tree View - Renaming the ‘Network’ object in the Tree View to an
incorrect name crashes the Sitespan Release 2.5.
Workaround - This object should NOT be renamed to an
incorrectly named object.
7.3.6. Installation Guide - During the installation procedure if the read me
file stage is bypassed the user cannot (go back) in order to get the
information on the RAS set-up or the need to run install batch file.
Both of which must be installed in order to complete the Sitespan
Release 2.5 installation process.
Workaround - The user must repeat the installation procedure.
In future releases the requirement to install RAS and installation
batch file must be displayed in a more prominent location (e.g. in
‘Set-up Complete’ dialogue).
7.3.7. Map View - In Map View (Network Map Object), when a site
containing no racks is double clicked, Sitespan Release 2.5 crashes.