User Manual

AS4000 Central Terminal
Installation and Commissioning
DLP 011
605-0000-452
Issue 1.3dr Date 7/02/00
Page 7 of 6
13. Select ‘Airspan DA CT modem shelf’.
14. Adjust the ‘Rx Gain’ and select ‘OK’.
Note: To start with, set the RX gain to around 2200. and click right mouse button
oné and ê at the side of the RX Gain Box to increase and Decrease reading at the
power meter. Check the output power of the ST, and repeat until the output power
reaches optimum level ( for 1.8 GHz bands = +11.00dBm, for 2.0-2.3GHz, 2.3-
2.5GHz and3.4-3.6GHz = +8.00dBm) remembering to account for the splitter loss.
15. Record the result.
16. Power off the ST.
17. With the LAT connected to the DTU, restore the DTU from test mode by typing TE 1.
18. Go to DLP-012.