User Manual

AS4000 Central Terminal
Installation and Commissioning
DLP 008
605-0000-452
Issue 1.3dr Date 7/02/00
Page 1 of 14 © Copyright Airspan Communications Corporation 2000
SETTING UP SYSTEM USING SITESPAN
Note: Sitespan should have been set up when commissioning the AC, but in the event
that the CT is being commissioned before the AC, the Sitespan set up has been also
included in this document.
Within Sitespan, both the racks and the shelves must be ‘built’ before the rack can be powered
up.
Do not connect Sitespan to the rack at this stage.
The following steps must be followed:
STEP PROCEDURE
1. Setting up Site Configuration on Sitespan
Before the system can be configured, Sitespan Version 3.4 Build 4 or later must be installed on
the dedicated PC. Before installing, ensure that the PC is running Windows NT service pack 3
or later is set to run RAS and has a spare comms port or Digiport available. Note If the
Sitespan managing an existing network is to be updated from a previous version then the
current database must be updated prior to running the V3.4 version. See Appendix 4 for details
of running the transfer program. For details on installing Sitespan software see the Sitespan
User Guide 605-0000-426
1. Sitespan can then be started as follows:
2. Start the Server by selecting ‘server’ from the ‘start menu’ (In the ‘Sitespan V34’
folder, under programs)
3. Start the Client by selecting ‘client’ from the ‘start menu’ (In the ‘Sitespan V34’ folder,
under programs)
4. From the client view, open ‘template.ssd’ from the file menu
5. Highlight the ‘object list, server’ and ‘create server’ from the ‘edit menu’