User Manual

AS4000 Central Terminal

Installation and Commissioning

DLP 005

605-0000-452

Issue 1.3dr Date 7/02/00

Page 10 of 10

• 1 x RF Card (RF) (Third Slot)

Insert the following cards into the Modem Shelf:-

• 1 x Analogue Card (AU)

• 1 x Demand Assignment Tributary Card (DTU).

Note: Test Modem

A ‘test modem’ is also required. Any modem card supplied with the equipment will

suffice for this purpose. 3.4-3.6GHz Band installations will require two modem cards.

Now go to DLP-006 and from the flowchart proceed from point labelled ‘Start

Existing’.

b) Shelf 2 (CT Rack) or Shelf 4 (Expansion Rack)

1. When installing cards into an existing installation the power is already connected and

the cards should be inserted in the order listed below.

Install the RF and Modem Shelf card set

Insert the following cards into the Combining Shelf:-

• 1 x RF Card (RF)(in slot 2 for modem shelf 2 or slot 4 for modem shelf 4)