User Manual

AS4000 Central Terminal
Installation and Commissioning
DLP 012
605-0000-452
Issue 1.3dr Date 7/02/00
Page 8 of 8
5. Connect STMON for windows to the Test ST. Details of connection and use of
STMON for windows are contained in 605-0000-470 STMON for Windows User
Guide.
6. Start Check that the ST is getting an invite and can connect to the system.
7. Repeat for other Modem Shelves
8. Remove Test ST from the ST list.
5. Remove Test Equipment
1. Remove the Test CRU and all interconnecting cables and accessories from the RF
Output connectors on the Central Terminal.
2. Connect Antenna if not already connected.
3. Replace the Shelf covers and the protective cap on the coupler if fitted.
THIS CONCLUDES THE CENTRAL TERMINAL COMMISSIONING TESTS.