Installation Guide

AirSynergy Equipment Installation Guide
Page 46 Commercial in Confidence SYN-UG-007 Rev A0.41
5. Navigate to “Management” and modify the IP address according to your network.
Figure 56- Mgmt IP Config
6. Click Submit
Note: Dynamic” IP Allocation is not supported in the current release. Please
select Static
Note: Internal Port configuration is not applicable to 16e BS and must not be
used. Configuration of the internal port may lead to management comms failure.
Note: Clicking the “Submit” your configuration is NOT implemented immediately
in the BS. The BS needs to be rebooted for the new configuration to be applied.
Choose Untagged or Modify the BS
Management VLAN when applicable
(Take care when changing to a
management VLAN since
communication from a Laptop or PC
without the relevant 802.1Q NIC
capability and configuration will be
lost)
Modify the BS IP
IPIP