Installation Guide

AirSynergy Equipment Installation Guide
Page 43 Commercial in Confidence SYN-UG-007 Rev A0.41
Figure 53 – Fit the top cover to the PoE injector box
6.4.2 Fit the top cover of the PoE injector box taking care to match the orientation of the label to the
assembled wiring.
Figure 54 – Fix the PSU into position using self tapping screws
6.4.3 The PSU module can be screwed into final position using the self-tapping screws provided into
a suitable wooden or insulated backing board (4 positions)