User's Manual

AirSynergy Equipment Installation Guide
Page 24 Commercial in Confidence SYN-UG-007 Rev 1
7 Connect to Power System
Caution: Hazardous voltage! Before working, ensure that the power is removed
from the power connection cables. When the system is powered on, do not
touch the power terminals.
7.1 Connect PSU Output to PoE injector
7.2 Run cables from the PoE injector to the AirSynergy
a) Use this procedure to terminate the -54V DC supply into the PoE injector
Figure 15 – AirSynergy power supply module and connection to the PoE injector