User's Manual

AirSynergy Equipment Installation Guide
Page 13 Commercial in Confidence SYN-UG-007 Rev 1
4.3 Verify Installation Requirements
4.3.1 Verify the Tools
Table 1 - AirSynergy installation tools
Tools
Small flat blade Screwdriver
Large Flat Bladed Screwdriver
20mm wrench or small Pipe wrench
10mm wrench
Wire strippers
Wire cutters
Small cross-head screwdriver
Ring terminals crimp tool
Tilt-meter (if accurate downtilt needs to be set)
Krone punch-down tool
4.3.2 Verify the Parts and Kits
Table 2 – AirSynergy installation parts and kits
Installation Kit /
Part:
Installation Kit details
Note:
AirSynergy
mounting
1 x AirSynergy Universal
Mounting Plate
1 x Sun Shield
1 x Sector Antenna mounting
plate with fixing kit
4 M4 nuts
4 M4 flat washers
4 M4 spring washers
4 M5 SEMs
1 x Sector Antenna (front
mounting)