Installation Guide

AirSynergy Equipment Installation Guide
Page 20 Commercial in Confidence SYN-UG-007 Rev 1
6.2 Secure AirSynergy and Antenna to pole mount plate
To mount the AirSynergy to the universal mounting plate, perform the following steps:
1. Hook the studs into the top slots of the mounting plate. With the studs engaged in the top
slots raise the unit slightly until the bottom studs also drop into their respective slots. Secure
the flange nuts (4 positions).
Figure 11 – Lift AirSynergy to top of pole-mount plate
Figure 5 – AirSynergy drops down into slots at the top of pole-mount plate