User's Manual

HiperMAX Masthead Equipment Installation Guide
Page 31 Commercial in Confidence UGD-D00093 Rev A.1
2. Use the two U bolts nuts, flat washers and spring washers to fix the other half of the pole
mount bracket to the pole as shown below.
Figure 18 – HiperMAX-micro SCRT attach pole mount bracket to pole
3. Join together the two halves of the bracket and clamp with the nut, bolt, and locking washers
provided. The part of the bracket connected to the SCRT is designed to locate in the head of
the bolt and stop it rotating. This allows the SCRT to be Vertically aligned. Horizontal
alignment is achieved by loosening the U-Bolts slightly and rotating around the pole.
Figure 19 – HiperMAX-micro SCRT attach SCRT and antenna to pole