User's Manual

HiperMAX Masthead Equipment Installation Guide
Page 23 Commercial in Confidence UGD-D00093 Rev A.1
5 Install the SCRT plate mount
5.1 Mount the SCRT
The SCRT is normally mounted on a pole (in close proximity to its external antenna if not using the
SCRT mounted Antenna). Alternatively, there is provision for the SCRT to be mounted by screwing
into the back through a metal mounting plate. The SCRT should be mounted so that the power and
optic connectors are facing down.
Figure 5 – HiperMAX-micro SCRT connection mounting plate design
Figure 6 – HiperMAX-micro SCRT connection fastening holes