User's Manual

HiperMAX Masthead Equipment Installation Guide
Page 18 Commercial in Confidence UGD-D00093 Rev A.1
4.3 Verify Installation Requirements
4.3.1 Verify the Tools
Tool
Large Crosshead Screw driver Phillips # 3 or Pozidrive #
3
Small flat blade Screwdriver
Medium Flat Bladed Screwdriver
13mm or 1/2 inch open ended Spanner
10mm or 13/32 inch open ended Spanner
Wire strippers
Wire cutters
Ring terminals crimp tool
RJ45 crimp tool
Table 1 – HiperMAX-micro installation tools
4.3.2 Verify the Parts and Kits
Table 2 – HiperMAX-micro installation parts and kits
Installation
Kit / Part:
SCRT Installation Kit
Mount per SCRT
consisting of:
Note:
SCRT Base
Station RF
1 x SCRT Unit
1 x Sun shield
Not required when SCRT mounted antenna is
used
1 x Antenna with mounting
brackets
1 x SCRT installation plate
mount kit (see below for
additional mounting
options)
4 M6 screws
4 M6 flat washers
4 M6 spring washers
1 earth kit