Brochure

ManualsBrandsAirSpade ManualsAir Excavation Tools & VacuumsUtility AirSpade 4000 105 scfm Kit

As with any professional grade tool, the UTILITY AIRSPADE

requires regular care to ensure proper operation. Prior to each

use, inspect the tool for any loose or visibly damaged parts.

Tighten or replace worn parts as required. Inspect the ber-

glass barrel for cracks, wear, or other damage. Remove dirt or

other foreign material from around the trigger and valve stem

areas, and from the berglass barrel. Periodically apply light oil

or lubricant (e.g. WD40) to ensure smooth operation.

OPERATING INSTRUCTIONS

Best Practices

Excavation Tips

Watering the work area ahead of time can often be helpful. Watering reduces

airborne dust if the soil is extremely dry. It also reduces the soil strength making

digging easier.

For deeper excavations or trenches loosen the soil in layers of several inches.

Remove the soil with a shovel or vacuum. Repeat the procedure until the desired

depth is reached.

Except in very hard and compacted clay, dwelling on the same spot tends to reduce

the rate at which material is excavated and can increase the amount of material

blown away from the excavation site.

For boring small diameter holes, position the UTILITY AIRSPADE barrel perpendicular

to the ground with the nozzle close to the surface. Depress the trigger, slowly

thrust the tool into the soil. When resistance is met, slowly withdraw the UTILITY

AIRSPADE and then reinsert. This procedure allows loose soil at the bottom

of the hole to exit upwards. Reinsert the nozzle and repeat the above procedure

until the desired depth of hole is reached.

airspade.com

Part # Description

ASU4105G4 Utility AirSpade 105 cfm w 4 ft Barrel

ASU4150G4 Utility AirSpade 150 cfm w 4 ft Barrel

ASU4105KT Utility AirSpade 105 cfm Kit

ASU4150KT Utility AirSpade 150 cfm Kit

ASU4004BD Utility AirSpade 4 Ft Barrel w Dirt Shield

ASU4002EX Utility AirSpade 2 Ft Extension w Coupler

ASU4003EX Utility AirSpade 3 Ft Extension w Coupler

ASU4004EX Utility AirSpade 4 Ft Extension w Coupler

ASU4005EX Utility AirSpade 5 Ft Extension w Coupler

ASU4000CP Utility AirSpade Barrel/Extension Coupler

ASU4105NZ Utility AirSpade 105 cfm Nozzle

ASU4150NZ Utility AirSpade 150 cfm Nozzle

ASU4045AA Utility AirSpade 45 Degree Angled Adapter

HT133 Sliding Dirt Shield

HT180 Auxiliary Handle

ASU4000HA Utility AirSpade Handle Assembly

ASU4000HR Utility AirSpade Handle Repair Kit

HT132 Storage Case with Lock

PARTS AND ACCESSORIES

COMPRESSOR REQUIREMENTS

AirSpade 150 – 185cfm @90psi

AirSpade 105 – 125cfm @90psi

MAINTENANCE

HANDLE

BARREL

NOZZLE