User's Manual

Table Of Contents

1. Press to select Bluetooth sound source. The Bluetooth source light

will show the status of the Bluetooth connection.

2. To pair a new device: Press and hold the Bluetooth pairing button

for 3 seconds. The Bluetooth source light will ﬂash quickly to show

that pairing mode has started. Look on your device for ‘Orbitsound’ in

the Bluetooth device list, and pair with it. When a device is paired, the

soundbar Bluetooth source light will change to solid blue.

3. If your device was previously paired, then you can short press the

Bluetooth button to ‘grab’ the device and resume playback.

Note: If you are asked for a PIN number, enter ‘0000’.

AUX input

The Jack and RCA inputs (AUX) input can be heard by choosing ‘AUX’

on the control panel.

Hint: The RCA inputs and jack (3.5mm) inputs mix, so more than once

external device can be connected. The soundbar will mix the 2 sources

together.

Remote control

The control panel functions can also be done from the remote control:

Source Changes the input source

Volume + / - Controls volume

Power Enter standby / resume

Change tone: Bass and treble controls the sound:

Note: Treble changes the sound of the soundbar + / - 5 steps.

Note: Bass changes the volume of the subwoofer remotely + / - 5 steps.

Remote playback: You can control the track and playback of a

connected Bluetooth device.

BASS TREB