User's Manual

Connect the Soundbar to your TV
1) Remove plastic covers from optical cable:
IMPORTANT: Remove the protective plastic covers from a new TOSLINK
(optical) cable before connecting to the optical sockets. Failure to
remove these covers may result in damage and will interrupt the sound
output.
2) Connect to your TV (optical)
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M10
To prevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX1
AUX2
WIRELESS
TV OPTICAL
AUDIO OUT
2
3
OR
HINT: When using the soundbar in this way, it is normal that the
speakers on the TV will need to be turned down or muted to stop sound
coming from the TV’s own speakers.
IMPORTANT: Make sure that the sound output mode for the optical
output on the TV is set to ‘PCM’, or ‘Normal’. This provides the best
overall listening experience.
IMPORTANT: FIRMLY CONNECT THE OPTICAL CABLE UNTIL IT ‘CLICKS’
If your TV does not have optical
Use the included analogue cable to connect the audio output from
your TV to the soundbar. Note: Some TVs may only have a 3.5mm jack
output, you can also use this output. If your TV has no audio output, you
can connect the optical cable to your set top box.