User's Manual
Table Of Contents
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID AND CHANGE
ANTENNA WHICH THE MANUFACTURER PROVIDES. IT IS THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
Specifications
Frequency range +/- 3 dB [Hz] 38 – 16KHz
Control; response (remote control) LF: +,-8dB subwoofer volume
HF: 10KHz +/- 8dB EQ
Maximum SPL [dB] 97dBA
Amp. power 280W total
Crossover frequencies [Hz] 190/5,000
Tweeter drivers 1 x 1” m/c
Front main drivers 4 x 2“ Orbitsound mk2
Spatial drivers 2 x 2” Orbitsound mk2
Enclosure type Sealed/orbitsound spatial
Sub-Bass driver 1 x 6.5”
Sub-Bass Enclosure type Tuned reflex
Connection input(s) Stereo Line level -10dBu
3.5mm jack and RCA.
TOSLINK optical digital input
Bluetooth (wireless)
Output(s) Orbitsound 2.4GHz audio
Recommended placement Bar, in front of television
Sub, floor, port facing rear
Dimensions (H x W x D) [mm] 90 x 500 x 100mm (soundbar)
135 x 230 x 320mm (sub)
Cabinet finish Soundbar: High gloss
Subwoofer: High density PVC
Weight (in packaging) 11.4Kg
Power consumption Standby / Idle 0.4W / 4W
Voltage / Power 22V DC / 110-240v AC
Remote Control IR lead code 6122/01FE
E&OE Exceptions and omissions excluded