User's Manual

subwoofer (soundbar working)
Check the subwoofer volume (back of subwoofer). Set to ‘normal’, then
adjust to preference.
Switch o subwoofer, wait for 1 minute, and switch on the subwoofer to
reset it.
Check power cables and power switches on soundbar and subwoofer.
Try a dierent wireless channel. Use a paperclip to short press the pair
button on the back of the soundbar. (See Channel selection)
If the subwoofer STATUS light is not lit, re-pair the subwoofer (see
Pairing)
Battery replacement (remote)
Replace remote battery with anode up (+) from back-side. Use type
CR2032 Lithium battery.