User's Manual

Maintenance
Cleaning and care advice
Use a soft, clean cloth moistened with plain, luke-warm water to clean
the exterior of the unit. Glass cleaner is a good way to remove finger
marks, but please use it sparingly, and avoid contact with the actual
loudspeaker driver units.
IMPORTANT: Never use solvents such as benzene or other strong
chemical cleaners since these could damage the unit’s finish. It is VERY
important that no liquid reaches the inside of the unit.
Troubleshooting
No sound is heard
Check power connections and that there is a continuous blue light on
control panel.
Check that the TV or other sound source is playing and that it is
connected properly to the soundbar. If unsure that your media device is
playing, unplug, and test with headphones.
Press the sound source button on the remote control or control panel to
change the sound source. The indicators show which source is playing.
Adjust the volume of the soundbar until sound is heard.