User's Manual

Other features
Power saving
The M9 features a low power state with wireless subwoofer low-
power control. When the soundbar enters standby mode, the power
consumption reduces. It is recommended that Users routinely use
standby mode to minimise household energy use.
Setting memory
When in standby mode, or if disconnected from the mains completely,
the soundbar will remember settings for pairing, bass, treble, volume
and source selection.
Note that the volume will be reduced if set very high when the unit
restarts to protect the listener.
Reset soundbar settings
Optical
Bluetooth
Aux
<HOLD>
You may wish to reset the soundbar settings (returning everything to
factory default). To do this, switch the unit on, then press and hold the
power button for a few seconds on the control panel. The soundbar
status light will flash, and then the soundbar will reset. Optical source
will be selected when the reset is complete.
Bluetooth resume / grab
If you have previously paired your phone/tablet, there is no need to re-
pair the device. Simply choose the Bluetooth source, then short press
the Bluetooth button on the control panel (or press play/pause on the
remote control). The soundbar will seek a previously paired device, and
resume playback.