User's Manual

Hint: There are a total of 10 channels. Shift the channel repeatedly until
there is no more interference. The soundbar will remember the channel
when power is disconnected, so once set, there is no need to re-set.
Subwoofer Pairing
To pair a subwoofer to the soundbar, follow this procedure:
1
2
3
4
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M10
To prevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX IN
Stereo
Line In
POWER
WIRELESS
1. (Optional Step - resets subwoofer) Long press the subwoofer pair
button (this erases any previous pairing). The subwoofer STATUS will
flash confirmation.
2. Long press the soundbar pair button to enter pairing mode. The
soundbar pairing STATUS will slow flash to show it has entered pairing
mode.
3. Short press the subwoofer pair button for it to join the soundbar. The
LED will change it’s flashing pattern to acknowledge.
4. Short press the soundbar pair button to exit pairing mode. The
soundbar and subwoofer STATUS lights will light together to show
successful paring.
Note: A short version of these instructions is printed on the subwoofer
Hint: You only need to re-pair a subwoofer if the STATUS light on it’s
rear panel is NOT showing solid red. I.e. if it is flashing, it is not currently
paired with the soundbar.