User's Manual

Subwoofer volume
The subwoofer volume control on the back of the subwoofer allows
you to preset the amount of bass that the system produces. Setting
to ‘normal’ is the recommended balance. For quiet TV use, you can
reduce the level. For louder music, you can increase the volume.
Hint: The Bass control on the remote also changes the volume of the
subwoofer.
Hint: Once the subwoofer volume is set, you won’t need to adjust it
often. It is set for the conditions of the room.
Subwoofer Wireless
The Orbitsound subwoofer wireless system is uniquely developed to
deliver the best possible listening experience in terms of minimal delay,
and maximum sound fidelity. The system uses a digital 2.4GHz signal,
similar to that used by computer WiFi systems.
The soundbar and subwoofer should be paired for you from new,
working out of the box.
Channel selection
If you experience intermittent sound, perhaps interference from a router,
computer, or another sound device operating on the same frequency,
you can change the channel that the Orbitsound wireless system is
running on.
Note: Interference usually sounds like the bass is stopping and starting,
and maybe a ‘popping’ sound. This is easily fixed by changing channel.
To change channel - Make sure the soundbar AND subwoofer are
switched on:
Spatial Soundbar with Bluetooth and Wireless Subwoofer
©2013 Orbitsound ltd. Model: M10
To prevent electric shock,
do not remove screws.
No User serviceable
parts inside.
CAUTION:
DC in 22V 2.5A
Made in China
Approved components used
ON OFF
OPTICAL
AUX IN
Stereo
Line In
POWER
WIRELESS
1
2
1. Use a paperclip to briefly press the ‘PAIR’ button on the soundbar rear
panel. We recommend changing channel 2 times (2 presses) if you are
hearing interference.
2. The PAIR status lights will flash on the soundbar and subwoofer. This
acknowledges that the channel has changed.