User's Manual
Table Of Contents
- Welcome
- Package contents
- Control panel overview
- Getting Started
- Advanced Setup & Use
- Other features
- Important safety information
- Maintenance
- Troubleshooting
- No sound is heard
- The sound is out of sync with the TV
- Remote does not work
- Sound is distorted
- Sound is noisy / ‘hissy’
- Digital optical issues: ‘Clicking’ or no sound
- No sound from subwoofer (soundbar working)
- Battery replacement (remote)
- Warranty Terms
- Making a Warranty Claim
- FCC Statement:
- Orbitsound Ltd Warranty Terms and Conditions
- WARNINGS
- Specifications
9
Bluetooth
You can connect your phone or tablet for Bluetooth playback.
Optical
Bluetooth
Aux
1
2
3
Solid blue light: You’re paired!
Slow ash blue light: Looking for previously paired device
Fast ash blue light: In pairing mode
1. Press to select Bluetooth sound source. The Bluetooth source light will show
the status of the Bluetooth connection.
2. To pair a new device: Press and hold the Bluetooth pairing button for 3
seconds. The Bluetooth source light will flash quickly to show that pairing mode
has started. Look on your device for ‘Orbitsound’ in the Bluetooth device list,
and pair with it. When a device is paired, the soundbar Bluetooth source light
will change to solid blue.
3. If your device was previously paired, then you can short press the Bluetooth
button to ‘grab’ the device and resume playback.
Note: If you are asked for a PIN number, enter ‘0000’.
AUX input
The Jack and RCA inputs (AUX) input can be heard by choosing ‘AUX’ on the
control panel.
Hint: The RCA inputs and jack (3.5mm) inputs mix, so more than once external
device can be connected. The soundbar will mix the 2 sources together.