User's Manual
Table Of Contents
- Welcome
- Package contents
- Control panel overview
- Getting Started
- Advanced Setup & Use
- Other features
- Important safety information
- Maintenance
- Troubleshooting
- No sound is heard
- The sound is out of sync with the TV
- Remote does not work
- Sound is distorted
- Sound is noisy / ‘hissy’
- Digital optical issues: ‘Clicking’ or no sound
- No sound from subwoofer (soundbar working)
- Battery replacement (remote)
- Warranty Terms
- Making a Warranty Claim
- FCC Statement:
- Orbitsound Ltd Warranty Terms and Conditions
- WARNINGS
- Specifications
7
Connect the Soundbar to your TV
1) Remove plastic covers from optical cable:
IMPORTANT: Remove the protective plastic covers from a new TOSLINK
(optical) cable before connecting to the optical sockets. Failure to remove
these covers may result in damage and will interrupt the sound output.
2) Connect to your TV with the optical cable:
Spatial soundbar with subwoofer and Bluetooth
Subwoofer Output
4 ohm minimum
Only connect supplied subwoofer
©2013 Orbitsound Ltd. Model: M10LX
HDMI
IN 1
HDMI
IN 2
VIDEO INAUDIO IN
OPTICAL
AUDIO OUT
DVI
AUDIO IN
TV CONNECTION PANEL
AUDIO OUT
<CLICK>
<CLICK>
HINT: When using the soundbar in this way, it is normal that the speakers on the
TV will need to be turned down or muted to stop sound coming from the TV’s
own speakers.
HINT: Make sure that the sound output mode for the optical output on the TV is
set to ‘PCM’, or ‘Normal’. This provides the best overall listening experience.
IMPORTANT: FIRMLY CONNECT THE OPTICAL CABLE UNTIL IT ‘CLICKS’