User's Manual

3
Important Safety Information
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings – on the product and in the owner’s guide.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources, such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wider blade or third prong
is provided for your safety. If the provided plug does not fit in your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by Orbitsound.
12. Unplug this apparatus during lightning storms or when unused for long
periods of time to prevent damage to this product.
13. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus; the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
14. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
15. Do not let objects or liquids enter the product – as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric
shock.
16. Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged.
17. This product may contain magnetic parts. Metallic materials may be attracted
to the product. Do not place credit cards or other magnetic storage media near
the product, because information stored on them may be erased.
18. To prevent risk of fire or electric shock, avoid overloading wall outlets,
extension cords, or integral convenience receptacles.
19. The mains plug is used to disconnect the device and it shall remain readily
operable. To completely disconnect the power input, the mains plug of the
apparatus shall be disconnected from the mains.
CAUTION MARKS:
These CAUTION marks are located on the back of some products. The lightning
flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated dangerous voltage within the system
enclosure that may be of sucient magnitude to constitute a risk of electric
shock.
EN