GRENADE USER’S MANUAL
bumper ring top cap ! PRIMARY WARNINGS • Be considerate. Toss grenades gently. Do not throw grenades directly at other players. • Do not fill or use grenade near open flames. pin • This product has no safe direction, all players must wear full coverage goggles. Safety glasses are unacceptable eye protection. • Do not handle armed grenades in safe areas. Disarm grenades by unscrewing bottom valve cover. Armed: Disarmed: • Treat any grenade as a loaded and armed grenade.
1 CHOOSE YOUR GAS Airsofters use gas propelled products in a broad range of temperatures from 10°C up to a blistering 35°C. This upper end of the temperature range is further extended when we leave our products in direct sunlight. For example, the hood of your car can be as hot as 60°C on a 25°C day.
2 LOADING INSTRUCTIONS 1. Remove end cap. Grenade is now made safe. 2. Remove plug. 5. Fill gas. 6. Set plug. 7. Load BB’s. 8. Screw on valve cover when entering play area. Grenade is ARMED. 1.5s delay 3s delay 3. Reset valve. 4. Choose delay and set pin.
3 4 MAINTENANCE Lubricate your AI grenade once every two deployments to maintain delay consistency. Use AI supplied Grenade Silicone Oil, other oils may affect the consistency of your grenade. A stiff shuttle that is difficult to reset when reloading is an indication that your grenade needs lubricant. RELIEF VALVE RESET Your Airsoft Innovations Tornado grenade features several safety measures.
5 GENERAL USAGE www.airsoft-innovations.com When filling grenades in the “safe” area, do not arm your grenade by screwing on the end cap. Armed grenades present a hazard to you and your fellow players if you are not wearing eye protection. Put on ASTM F1776-01 compliant eye protection before entering the play area and arming your grenade. Grenades without an end cap cannot pressurize their bb spirals and thus cannot propel projectiles because propellant is given an easy exit path out of the grenade.
www.airsoft-innovations.
