Product Manual

MN078-1 Rev K

In the event of an alarm or you observe the Oxygen Concentrator is not working properly; consult the

troubleshooting section of this manual. If you cannot resolve the problem, consult your Equipment Provider.

If the audio alarm is weak or does not sound at all, consult your Equipment Provider immediately

For units equipped with the oxygen monitor option - Contact your Equipment Provider immediately if the amber

OXYGEN MONITOR light remains on for more than 15 minutes and/or the audio alarm activates.

If the humidifier bottle tubing is not properly connected to the humidifier bottle fitting or to the oxygen outlet, an

oxygen leak can occur.

Cannula must be non-kinking, which can be used for a total length of 25 ft. (7.6m) max.

Ensure the cannula is fully inserted and secure. You should hear or feel oxygen flow to the prongs of the nasal

cannula. If oxygen does not seem to flow, first verify that the flow meter ball is registering a flow. Then, place the

tip of the cannula into a glass of water; if bubbles come out of the cannula, oxygen is flowing. If bubbles do not

appear, refer to the troubleshooting section of this manual.

Always follow the cannula manufacturer’s instructions for proper use. Replace the disposable cannula as

recommended by the cannula manufacturer or your Equipment Provider. Additional supplies are available from

your Equipment Provider.

The use of some oxygen administration accessories not specified for use with this oxygen concentrator may

impair its performance. Recommended accessories are referenced within this manual.

To Equipment Provider: The following oxygen administration accessories are recommended for use with the

Oxygen Concentrator

• Humidifier Bottle: Part No. HU003-1

• Nasal Cannula with 7 feet (2.1 m) of tubing: Part No. CU002-1

• Humidifier Adapter Extension: Part No. HU002-1

• Oxygen Outlet Adapter: Part No. F0025-1

• OxySafe Kit w/ Cannula & 7 ft. tube Part No. 20628667

• OxySafe Kit w/ DISS tubing adaptor Part No. 20628668

• Air Outlet Kit Part No. KI365-1