User Manual

7
CONTROL PANEL FUNCTIONS
⑧
⑨
①②
③
④
⑤
⑧
⑦
⑥
⑨
⑪
⑫
⑩
① Power : Use to power on / off.
② ∨ ∧ : Raises or lowers the setting temperature or sleep (off) time.
③ Mode : Use to select Cooling / Fan / Dehumidifier mode.
④ Fan : Controls fan high / low speed.
⑤ Off Timer : To set the length of time, once turned on, that you wish the cooler to run for.
You can set 0~24 hours. Time intervals are 30 mins. up to 10 hours and then 1 hour between
10 and 24 hours.
⑥ Room : If the LED is On, the displayed temperature is for Room temp.
⑦ Comp. : When the compressor is operating. The LED is On.
⑧ Error : Error signal.
⑨ Check : If Water full or Align Drain Tank is checking. The LED is on.
⑩ Display : Display Room temperature, and also the setting temp and sleep time if they had been set.
⑪ ℃,℉ : When the user change temperature unit ℃↔℉, ℃ or ℉ will be turn on.
⑫ hr : When the user set the off timer, ‘hr’ will be turned on.