Service Manual

428 04 1701 00 April 2012
TECHNICAL SUPPORT MANUAL
Two--Stage Split System Heat Pump
(H,C,T)CH6
DANGER, WARNING, CAUTION, and
NOTE
The signal words DANGER, WARNING,
CAUTION, and NOTE are used to identify levels of
hazard seriousness. The signal word DANGER is
only used on product labels to signify an immediate
hazard. The signal words WARNING, CAUTION,
and NOTE will be used on product labels and
throughout this manual and other manuals that may
apply to the product.
DANGER -- Immediate hazards which will result in
severe personal injury or death.
W ARNING -- Hazards or unsafe practices which
could result in severe personal injury or death.
CAUTION -- Hazards or unsafe practices which
may result in minor personal injury or product or
property damage.
NOTE -- Used to highlight suggestions which will
result in enhanced installation, reliability, or
operation.
Signal Words in Manuals
The signal word WARNING is used throughout this
manual in the following manner:
The signal word CAUTION is used throughout this
manual in the following manner:
Signal Words on Product Labeling
Signal words are used in combination with colors
and/or pictures on product labels.
WARNING
Safety Labeling and Signal Words
!
!
CAUTION
WARNING
TABLE OF CONTENTS
Model Number Identification 2--3...................
R--410A Quick Reference Guide 4..................
Wiring Diagram Connection 5......................
Wiring Diagram Schematic 6......................
Flash Code 7--8..................................
R--410A Charging Chart 9.........................
Tech Labels (Expanded Data) 10--14...............
Cooling Multiplying Factors 15--38..................
Heating Multiplying Factors 38--61.................
Physical Data 62.................................
Accessories 63..................................
HCH6,CCH6,TCH6 Parts List 64--66...............
Exploded Drawings 67--69.........................
!
WARNING
PERSONAL INJURY, AND/OR PROPERTY DAM-
AGE HAZARD
Failure to carefully read and follow this warning
could result in equipment malfunction, property
damage, personal injury and/or death.
Installation or repairs made by unqualified per-
sons could result in equipment malfunction, prop-
erty damage, personal injury and/or death.
The information contained in this manual is in-
tended for use by a qualified service technician fa-
miliar with safety procedures and equipped with
the proper tools and test instruments.
Installation must conform with local building
codes and with the National Electrical Code
NFPA70 current edition or Canadian Electrical
Code Part 1 CSA C.22.1.