User's Manual

-
+
-2 +2
-4
+4
-6
+6
-1
+1
-2 +2
+3
-3
DESIGNED BY PHIL JONES
+3
-3
0
-6
+6
+1
-1
0
-3
+3
-
+
DESIGNED BY PHIL JONES
-2 +2
-4
+4
-6
+6
-1
+1
-2 +2
+3
-3
-
+
-2 +2
-4
+4
-6
+6
-1
+1
-2 +2
+3
-3
DESIGNED BY PHIL JONES
+3
-3
0
-6
+6
+1
-1
0
-3
+3
-
+
DESIGNED BY PHIL JONES
-2 +2
-4
+4
-6
+6
-1
+1
-2 +2
+3
-3
-
+
-2 +2
-4
+4
-6
+6
-1
+1
-2 +2
+3
-3
DESIGNED BY PHIL JONES
+3
-3
0
-6
+6
+1
-1
0
-3
+3
-
+
DESIGNED BY PHIL JONES
-2 +2
-4
+4
-6
+6
-1
+1
-2 +2
+3
-3
-
+
-2 +2
-4
+4
-6
+6
-1
+1
-2 +2
+3
-3
DESIGNED BY PHIL JONES
+3
-3
0
-6
+6
+1
-1
0
-3
+3
-
+
DESIGNED BY PHIL JONES
-2 +2
-4
+4
-6
+6
-1
+1
-2 +2
+3
-3
Preparaons
RCA audio
cable
CD player/audio
decoder/ music
player, etc.
PC or Mac
USB cable
Fiber opc
input audio cable
TV/CD player/
Blu-ray player,
etc.
CD player
CD player
4. The le and right speakers pairing
1. Connect to playback devices
Preparaons
Le speaker
Right speaker
3. Input selecon switching
Coaxial cable
Right speaker
Le speaker
XLR cable
Right speaker
Le speaker
Right speaker Le speaker
PAIR PAIR
RCA audio cable
RCA audio cable
XLR cable
CD player/audio decoder
输入选择
平衡输入
非平衡输入
其它输入
INPUT SELECT
BALANCED
UNBALANCED
OTHERS
* For the balanced input, slide the "INPUT
SELECT" switches to the "BALANCED"
posions on both speakers.
* For the unbalanced input, slide the "INPUT
SELECT" switches to the "UNBALANCED"
posions on both speakers.
* For other inputs (AUX/Coaxial/Opcal/USB/
Bluetooth), slide the "INPUT SELECT" switches
to the "OTHERS" posions on both speakers,
and use the remote control or press the
"VOLUME" dial on the right speaker to select
the desired audio source.
2.Connect to power source
11 12
5. Speakers placement
The le and right speakers have been paired before leaving
the factory. It should be in the wireless connecon mode
when both speakers are powered on and the red indicators
on both speakers are lit constantly. Please follow the steps
below to re-pair if needed.
1. Power on both speakers, first press the "PAIR" buon on the rear panel of the right
speaker, the pairing indicator will flash rapidly;
2. Then press and hold the "PAIR" buon on the rear panel of the le speaker, the pairing
indicator will flash rapidly;
3. Wait unl the red indicators on both speakers are lit constantly. Then the pairing is
complete and wireless connecon is made.
Note: If the red indicators on both speakers are lit in a breathing paern, it indicates that
there is no connecon or the connecon is unsuccessful, please repeat the above steps.
* Place both speakers on a solid, leveled and steady
surface.
For the opmum sound posioning and layering, using
the specialstands of A300Pro is recommended.
* For the opmum stereo sound effect, the listener
can slightly adjust speaker angel.
* For the most accurate sound and balance, the listener
should be in the axis of equilateral triangle formed
by the le and right speakers.
* High frequency has a much higher direcvity, and
for more accurate sound effect the speaker's tweeter
should be at ear level of the listener.
O
* Connect the power cables included to power input
ports on the rear panels of both speakers, and then
insert power plugs into wall outlet;
* Aer all cables are connected securely, press power
switches on the rear panels of both speakers to turn
on main power;
* When in other inputs (AUX/Coaxial/Opcal/USB/
Bluetooth), press the " " buon on the remote
control to switch to Standby/ON state.
Please press the " " power switches to turn off
main power.
English
English