User's Manual
8
Speakers illustraon Speakers illustraon
1.LED display window and remote receiving window
Displays the current audio source signal.
Also displays the master volume level and treble/bass level when adjusng volume and
treble/bass level in other inputs (AUX/Coaxial/Opcal/USB/Bluetooth).
2.Volume dial
Rotate to adjust volume level and input sensivity;
When the "INPUT SELECT" switches are set at "OTHERS" posions, press to switch input
signal.
When powered on, press and hold to enter standby; when in standby, press and hold to
power on.
3.Input sensivity indicator
When the "INPUT SELECT" switches are set at "BALANCED" and "UNBALANCED"
posions, this indicator will be steady lit.
4.Volume indicator
When the "INPUT SELECT" switches are set at "OTHERS" posions, this indicator will be
steady lit.
5.Volume and input sensivity display window
When the "INPUT SELECT" switches are set at "BALANCED" and "UNBALANCED"
posions, it will display the current input sensivity value, ranging from -30 to +6dB.
When the "INPUT SELECT" switches are set at "OTHERS" posions, it will display the
current volume level (0-60).
6.Input selecon toggle switch
Slide the "INPUT SELECT" switches to "BALANCED" posions on both speakers when
using XLR cables to respecvely input signal to the le and right speakers;
Slide the "INPUT SELECT" switches to "UNBALANCED" posions on both speakers
when using RCA audio cables to respecvely input signal to the le and right speakers;
Slide the "INPUT SELECT" switches to "OTHERS" posions on both speakers when in
the wireless connecon mode.
18
10
11
1
DESIGNED BY PHIL JONES
-2 +2
-4
+4
-6
+6
-1
+1
-2 +2
+3
-3
-
+
-2 +2
-4
+4
-6
+6
-1
+1
-2 +2
+3
-3
DESIGNED BY PHIL JONES
2
3
4 5
6
7
8
9
12
13
14
15
16
17
+3
-3
0
-6
+6
+1
-1
0
-3
+3
18
17
10
11
7
8
9
12
2
3
4 5
6
7.Pairing buon
The le and right speakers have been paired before leaving the factory. If the wireless connecon
fails to resume, please follow "The le and right speakers pairing" on page 12 to press the
pairing buons to re-pair.
8.Pairing indicator
Red indicator steady lit = the le and right speakers already paired.
Indicator flashing in a breathing paern = the le and right speakers not connected or connecon
failed.
Professional operang mode: When the "INPUT SELECT" switches are set at "BALANCED"
and "UNBALANCED" posions on both speakers, the le and right speakers can be operated
separately and the treble/bass dial can be used to adjust treble/bass level.
Note: The treble/bass dials on the rear panels of both speakers only funcon in the
balanced and unbalanced inputs, they do not funcon in the wireless connecon mode.
9.Unbalanced input (RCA) port
Connect to RCA output port of audio source devices using RCA audio cable; connect the le
and right speakers respecvely.
10.Balanced input (XLR) port
Connect to audio source devices with balanced output port using XLR cable; connect the le
and right speakers respecvely.
11.Bass level adjustment
In the balanced or unbalanced inputs, bass level of both speakers can be adjusted respecvely
within a ±6dB range.
12.Treble level adjustment
In the balanced or unbalanced inputs, treble level of both speakers can be adjusted respecvely
within a ±3dB range.
Wireless connecon mode of the le and right speakers: When selecng this mode, slide
the "INPUT SELECT" switches to "OTHERS" posions on both speakers. Then audio source
signal can be input from AUX, COAX, OPT or USB port; and Bluetooth devices can be
connected via Bluetooth.
All funcons of the remote control are available in the wireless connecon mode.
13.AUX input port
Connect to RCA output port of audio source devices using RCA audio cable.
14.Coaxial input port
Connect to audio source devices with coaxial output port using coaxial cable.
15.Opcal input port
Connect to audio source devices with opcal output port using fiber opc input audio cable.
16.USB B type port
Connect to audio source devices with USB output port using USB cable.
17.Power cord connector
Connect to plug of power cord.
18.Power switch
Turn on/off speaker power.
Right speaker Le speaker
7
English
English