User's Manual

Specificaons/statement
Troubleshoong
If you want to find out more about AIRPULSE, please visit our website at
www.airpulseaudio.com
Problem
No sound
• Check if the le and right speakers are powered on.
Cannot connect
via Bluetooth
• Try another Bluetooth device for connecon.
The A300Pro does
not turn on
Noise coming
from speakers
22
21
NOTICE:
For the need of technical improvement and system upgrade, informaon
contained herein may be subject to change from me to me without prior noce.
Tweeter: Horn Loaded Ribbon Tweeter
Mid-Woofer: 6.5inch Aluminum Cone Underhung Design Neodymium
Power Mid-Woofer
Amplifier System: Digital Amplifier with Xmos Processor
Power Output: L/R (Treble):10W+10W,
L/R (Woofer): 120W+120W
Frequency Range: 40Hz-40KHz
Signal-Noise Rao: L/R: ≥90dB(A)
Input Mode: Balanced/Unbalanced/AUX/USB/Opcal/Coaxial/Bluetooth
Cabinet Size (WxHxD): 225 x 385 x 350 (mm)
Net Weight: 24 Kg (53 Pounds) / Set
English
English
Soluon
• Try to turn up the volume using either the master volume
control or remote control.
• Ensure the audio cables are firmly connected and the input is
set correctly on the speakers.
• Check if there is signal output from the audio source.
• Make sure the speaker is switched to Bluetooth input, in other
audio input mode Bluetooth can not be paired or connected.
Disconnect from any Bluetooth device by press and hold the
" " buon in Bluetooth mode, and then try again.
• Effecve Bluetooth transmission range is 10 meters, please
make sure operaon is within the range.
• Check if mains power is connected, or if the wall outlet is
switched on.
• AIRPULSE speakers generate lile noise, while the background
noise of some audio devices are too high. Please unplug audio
cables and turn the volume up, there should be no sound can
be heard at 1 meter away from this product.
• Move digital equipment or high-frequency equipment far away
from this product.