Integration Guide

Hardware Integration Guide
Rev. 2 January 2021 6 41114156
Required Connectors
Table 1-1 describes the connectors used to integrate the MC7411 PCI Express Mini Card
into your host device.
Table 1-1: Required host-module connectors
a
a. Manufacturers/part numbers are for reference only and are subject to change. Choose connectors
that are appropriate for your own design.
Connector type Description
RF cables • Mate with Hirose U.FL connectors
(model U.FL #CL331-0471-0-10)
• Three connector jacks
EDGE (52-pin) • Industry-standard mating connector
• Some manufacturers include Tyco, Foxconn, Molex
• Example: UDK board uses Molex 67910-0001
SIM • Industry-standard connector. Type depends on how host device
exposes the SIM socket
• Example: UDK board uses ITT CCM03-3518