User's Manual

To set a time-out time, click on the text box “Key Off Delay” and enter the desired delay up to
99 milliseconds then click “Send Button” next to the box. To verify the setting, click on the
“Read Button” and the display will be updated with the channel setting.
ATTENUATION
With high RF receive levels, an input attenuator can be set 0 to 15dB in 1dB steps.
SETTING ATTENUATION
To set Attenuation: click the function window Attenuation on the main screen. Click on the
scroll bar next to the text box, a scroll down list of available attenuation settings. Double Click
the on desired setting.
50289-BAM-8-800
- 10 -