User's Manual

SYSTEM SPECIFICATIONS
Description Specification
Frequency Range 806-824 MHz,851-869 MHz
Outbound Channels (Uplink) 8 max. in 806-824 MHz Band
Inbound Channels (Downlink) 8 max. in 851-860 MHz Band
Channel Bandwidth ( Uplink/Downlink) > 100 kHz
Channel Spacing 25 kHz
RF Frequency Accuracy Tracks input signal exactly
Adjacent Channel Selectivity 70 dB @ ± 75 kHz Fc
RF Output Power (Downlink) +25 dBm per carrier
RF Output Power (Uplink) +26 dBm per carrier
Variation of Output Power with Input Level +0, -1.0 dB
Maximum Passband Ripple across Full Band 2 dB
Maximum Passband Ripple across any 100 kHz channel 1 dB
Amplifier Input Ports (no damage) -15 dBm
Propagation Delay <32 µs (typical)
Intermodulation/Crossover Distortion at Full Output Power -60 dBc all carriers present
Channel to Channel Isolation -70 dB
Minimum Signal to produce Full Output Power -90 dBm
Dynamic Range 50 dB (typical)
Duty Cycle Continuous
RF Spurious Output, < 800 MHz or > 1000 MHz -60 dBc maximum
RF Spurious Output 800 MHz- 1000 MHz -85 dBc maximum
System Noise Figure < 9 dB (typical)
Input/Output Impedance 50 Ohms
Amplifier Damage (no damage) Continuous short or open
Input/Output VSWR 1.35:1 worst case
Input/Output Connectors Type N Female
Operating Temperature Range -20º C to + 60 º C
50289-BAM-8-800
- 3 -