User`s guide

Installation
2-10
Back Panel Indicators (Ethernet Only)
The back panel indicators are:
• 10BaseT polarity : Solid amber to indicate the
10BaseT polarity is reversed. Check cable
connections.
• 10BaseT active : Solid green to indicate the
10BaseT has been configured as the active port.
• Ethernet Rx : Flashes green when an Ethernet
packet has been received.
• Ethernet Tx: Flashes green when an Ethernet
packet has been transmitted.
• 10Base2 active: Solid green to indicate the
10Base2 has been configured as the active port.
• Packet Collision: Flashes amber to indicate a
packet collision has occurred.
10Base2
10Base5
10BaseT
Packet
Collision
Ethernet Tx
10BaseT polarity
10BaseT active
10Base2 active
Ethernet Rx