User`s guide

Installation
2-7
Attaching the AC/DC Power Pack
and Powering On Ethernet or Token
Ring Wireless Bridge
1. Insert the small plug on the end of the AC/DC power
pack cord into the power port.
2. Plug the AC/DC power pack into an electrical outlet
(120VAC/60 Hz or 90-264VAC as appropriate).
3. Power on the Aironet Wireless Bridge by pushing the
On/Off button.
When power is initially applied to the Aironet Wireless
Bridge, all three indicators will flash in sequence to test the
functionality of the indicators.
On/Off Button